Travel/Field Service
First In Finishing offers travel service and field work.
First In Finishing can send 1-3 service techs to your facilty to directly work with you to do whatever is needed.
Travel work is completely custom and changes by job. Anything and everything powder coating First In Finishing is up to working on and service.
Here are a few Examples of what First In FInishing has done for Travel work.
Equipment Inspections-
First In Finishing has inspected many automatic and manual powder coating operations. Using a series of tools and test they can determine how efficiently your powder coating production is running and how to lower cost while improving or keeping production the same.
Often times equipment inspections are partnered with service agreements in hopes to keeping the savings and production when they are done.
Equipment Repairs-
First In Finishing specializes in repairs and problem solving equipment while in the field.
They often bring the equipment to do the repairs directly to your facility so that way the service can be done and then continue production.
Here is a solenoid from a Gema Optitronic. Due to poorly treated air, this solenoid began to fail causing spitting/surging issues.
We cleaned and replaced the needed parts in order to get this unit back and running
​
Equipment Refurbishments-
First In Finishing has serviced many Booths, Guns, and full powder lines.
When production goes down and equipment needs replaced we are happy to help.
From changing all of the powder hose and rinsing line to replacing worn out nozzles FINF is ready to help you get production back rolling.
In this Picture we are replacing fluidizing membranes on the bottom of a booth. Dirty work, but needs done.
Equipment Installations-
First In Finishing has installed many different forms of powder coating equipment.
FINF has provided installation of Manual powder systems automatic
gun systems, booths, and has been apart of conveyer installs as well as ovens and washer installs.
When you purchase powder coating equipment through First In Finishing, we will be happy to help get the equipment installed.
Equipment Retrofitting-
First In Finishing can retrofit powder coating equipment into other equipment.
They have installed Gema and Electron equipment into other branded booths.
Reason behind this is, its often cheaper to buy used Gema or new Electron then it is to repair and service the current equipment. Because of this many companies decide to get a new guns and units.
Pictured here is FINF installing GA02 Guns into a Diemco Booth
Equipment Troubleshooting-
First In Finishing does a lot of equipment troubleshooting and problem solving.
Within the powder coating operation there can be alot of room for errors and things to not go accordingly. FINF understands this and works there hardest to be able to help fix issues inside of your facility.
From bad power supplies and fried mother boards to simple things like incorrect air pressures and guns not being on.
We are ready to help whenever we are needed
First In Finishing utilizes a service van in order to best accommodate there customer.
When traveling you never know what will be needed and by having a vehicle full of tools and parts it help prevent any delays.
Our service van is completely loaded out with everything Electron and Gema powder coating. Also comes with all the tools and instruments to properly diagnose your equipment.
We typically use this van for any close service calls or any big installation/repair.
First In Finishing utilizes flying to be able to get to customers faster and cheaper. In this situation, alot of time we will bring our tools and equipment with us, packed into crates.
On bigger jobs and installs, we will often ship all the tools and equipment directly to the facility and then fly their after. This saves on money and time.
Travel Service Quotes and Pricing
To recieve a customized quote for travel services please email Monte at Monte@Finf.us or call at (317) 439-9019
You can also check out our field service pricing here.